SSYH-1800
uPVC Arch Bending Machine(air type) |
 |
| Technical
Parameter: |
| Input
Voltage/frequency |
380V/
50 Hz |
| Input
Power |
12.6
KW |
| Worktable
dimension |
2850mm×1250mm×800mm |
| Air
heating box Dimension |
3500mm×600mm×1003mm |
| Weight |
900
KG |
| Remarks:
*use our patent heating technology,save much electric power.
*inside circular hot air wind, get equal temperature in box.
*two temperature controllers to keep constant 122 degree temperature.
*10 minutes heating time, can get suitable soft pvc profile.
*very clean operation environment.
*when using,economic and save money.
*long using life and little maintenance cost.
|
|
| Structure Feature |
|
This
machine is made up of bending and shaping worktable, air heating
box, shaping belt, and filling belt. It features reliable
function, safe operation, and high efficiency.
|
| Function
Explanation |
|
After being filled up, profile and softened in the
heating box, and then it can be bent and finalized to the design
of semicircle you need whose diameter is between 500mm and 1800mm
or arch of any type whose diameter is not more than 3000mm on
the worktable. Further it can use different shaping belt according
to different profile. |
| Special
Hint |
*
When installing, you must do grounding it according to the electric
wiring diagram.
* Keep the working floor clean, prevent from sliding and freezing.
* The degree of tightness should be suit as the profile is being
filled up.
* The presetted temperature of the heating box and the heating
interval of the profile need adjusted according to the current
area air temperature and the profile.
* After finishing
work, you must shut the electric power, clean the worktable
surface and hood the plastic cloth as dustproof. |
|
|